Your position: Home / Dry herb Machine

Rosin Press Machine

Rosin Press Shops Applicable flower dry herb heat press machine
    Please select the information you wantX
(1000 available)
  • Description
  • Reviews(18)
Have Flower and prefer Solventless Rosin?  Look no further… Enough have asked and we’re delivering a personal Rosin Press.  Get 1.5 Tons of pressure, or 3000 lbs., delivered to 2 evenly heated plates, size 3″ x 3 1/2″.  Dial in your temperature and begin.  These are build with ease of use in mind and the best part, you don’t need to buy an extra compressor and no hand pumping required.  These are all electric and at the touch of a button, your able to make Rosin. Press is 26 lbs. and allows for easy transportation.

Press Specs: 18″ x 15″ x 13″.

Get yours for $488 and Get FREE SHIPPING in continental worldwide


This guide will help you get started and pressing your product in no time!

Plug in your press to power.
Turn on press via power switch the back of the unit.
Set the temperature via the temperature buttons, between 150 degrees and 325 degrees Fahrenheit. (210 is the suggested starting temperature, but your application might require more or less.)
Place your product into a rosin bag and onto the heated plates between parchment paper or TPFE paper.
Allow the plates to reach the set temperature
Rise plate via the ‘UP’ plate button until product is tightly compacted between both bottom and lower plates.
Wait for approximately 2-3 minutes or more, depending on the amount of product used.
Lower the plate by pressing the ‘Down’ plate button until it is all the way at the bottom.
Carefully remove rosin bag, as the plate will be still hot.
Shut down unit when finished with press, as to not cause damage to the unit!
With these simple instructions, you will be pressing your own rosin in no time flat! We at hope that you enjoy your product!

Quick Details
*Application:Rosin Press. Dry Herb Press
*Available Size:81*71mm
*Voltage:  220V/ 110V,other voltage is available
*Plug:US plug/ British plug/European Plug/Australian plug
*Motor working load:2500N
*Motor maximum load:3000N
*Surface temperature tolerance:±10℉
*Surface finish:Powder coating
*Patenship: PTC appearance patent
*Temp. Range:150~325℉
*Packaging:39*33*25cm(Plywood Case)
Average rating: 5.0 based on 18 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login